Page 1 of 1

CAD - Cardboard Aided Design

Posted: 19 Oct 2011, 06:26
by Hasher
Hi All

Something I was thinking of after seeing so many great cardboard designs on here.Why not a Cardboard structure scanner designed in the style of a fold able tab design, like those cardboard storage boxes found in the stationary store.

Thinking about it. A light flat packable scanner that doesn't cost much , recyclable ,low cost , easy to construct and perfect for the third world. Making from flat black colour cardboard would save painting

I have seen dedicated Cardboard design software like http://www.packmage.com/ but maybe there is add-on's for more popular CAD programs. Design could be mostly virtual

Image

I'm not so good at putting across my ideas , so hopefully people understand me ;-)

Re: CAD - Cardboard Aided Design

Posted: 19 Oct 2011, 09:48
by Tim
That is a truly fantastic idea. There have been many cardboard ideas and talk of improved cardboard designs, but that's taking it to the next level. Mass produce-able, much cheaper shipping costs, and if made from higher grade cardboard with a well though out design it would be impressively sturdy. It wouldn't have the speed of a movable platen, fancier, more expensive, design, but that would be a worthwhile trade-off in many cases. A platen with a handle that lifts manually could be added easily enough.

Re: CAD - Cardboard Aided Design

Posted: 19 Oct 2011, 09:48
by daniel_reetz
You know, it would be awesome to make a foldable version of the cardboard box scanner... that's a pretty cool idea, Hasher.

Re: CAD - Cardboard Aided Design

Posted: 10 Nov 2011, 14:52
by freemab
Why not use triangular mailing tubes, like these:
https://shop.usps.com/webapp/wcs/stores ... y=10000002
-OR-
http://tinyurl.com/3p9wk9v

Caveat: That illustration is used just because I knew where to find it. USPS priority mailing boxes are provided free by USPS with the understanding that they will be used for a PAID mailing. The following is from the USPS FAQs:
" Using boxes that are ordered at The Postal Store® for other uses
"The terms of Agreement for the use of United States Postal Service shipping supplies is as follows: I understand that Express Mail service, Priority Mail service, Global Express Guaranteed, Express Mail International and Priority Mail International packaging is the property of the United States Postal Service and is provided solely for sending Express Mail, Priority Mail, Global Express Guaranteed, Express Mail International and Priority Mail International. Misuse may be a violation of federal law."

Re: CAD - Cardboard Aided Design

Posted: 10 Nov 2011, 14:54
by freemab
...and if you're going to go to this much trouble, skip the corrugated cardboard and go with corrugated plastic:

http://www.coroplast.com/

Re: CAD - Cardboard Aided Design

Posted: 11 Nov 2011, 09:24
by daniel_reetz
True. And that stuff is easy to get for free - old campaign and advertising signs are printed on it.

Re: CAD - Cardboard Aided Design

Posted: 11 Nov 2011, 09:49
by freemab
Good idea. That would enable a person to try it out at no cost. But what I was actually thinking is that somebody could set up to cut this stuff as for prefab cardboard boxes and just sell it on-line. 4'x8' sheets are available, and it can be got in black and other colors. It is somewhat more flexible than the comparably sized corrugated cardboard, so the design of the "box" would probably have to undergo a few revisions till one rigid enough was developed. I think the cardboard-box design actually benefits from the overlap of the flaps under the book itself, giving crossed-cardboard to support the book, rather than a single layer.

Re: CAD - Cardboard Aided Design

Posted: 28 Dec 2011, 21:12
by freewheeling
I've been wondering myself why people don't use coroplast. I've seen a number of projects where it has been used to create aerodynamic tailboxes for bike designs, and even complete fairings. Mode of construction is usually folding, cutting, and hot glue. I can almost imagine a kind of orogami with pre-scored folds.