Monson's Servo Auto Scanner

Built a scanner? Started to build a scanner? Record your progress here. Doesn't need to be a whole scanner - triggers and other parts are fine. Commercial scanners are fine too.

Moderator: peterZ

User avatar
jck57
Posts: 376
Joined: 23 Nov 2009, 15:21

Re: Monson's Servo Auto Scanner

Post by jck57 »

Tilting spine cradle.
IMG_1070.JPG
IMG_1070.JPG (169.57 KiB) Viewed 14572 times
IMG_1071.JPG
IMG_1071.JPG (141.95 KiB) Viewed 14572 times
IMG_1072.JPG
(129.92 KiB) Downloaded 10666 times
IMG_1073.JPG
IMG_1073.JPG (155.5 KiB) Viewed 14572 times
IMG_1074.JPG
IMG_1074.JPG (110.65 KiB) Viewed 14572 times
IMG_1075.JPG
IMG_1075.JPG (146.63 KiB) Viewed 14572 times
User avatar
daniel_reetz
Posts: 2812
Joined: 03 Jun 2009, 13:56
E-book readers owned: Used to have a PRS-500
Number of books owned: 600
Country: United States
Contact:

Re: Monson's Servo Auto Scanner

Post by daniel_reetz »

Great work, as usual. Is the large offset to accommodate your robotic arms/stuff?
User avatar
jck57
Posts: 376
Joined: 23 Nov 2009, 15:21

Re: Monson's Servo Auto Scanner

Post by jck57 »

daniel_reetz wrote: Is the large offset to accommodate your robotic arms/stuff?
There are really two separate bases that slide-adjust to fit different book sizes.
User avatar
jck57
Posts: 376
Joined: 23 Nov 2009, 15:21

Re: Monson's Servo Auto Scanner

Post by jck57 »

Air blasts replace mechanical page flipper and page flattener. Pneumatics salvaged from my first auto-scanner build. http://www.diybookscanner.org/forum/vie ... f=14&t=940

User avatar
jck57
Posts: 376
Joined: 23 Nov 2009, 15:21

Re: Monson's Servo Auto Scanner

Post by jck57 »

New 75 degree cradle angle. Pressers now feature slides that contact the pages and prevent the paper from folding up in the gutter as the pressers wedge down.

mjklin
Posts: 17
Joined: 07 Jan 2010, 12:18

Re: Monson's Servo Auto Scanner

Post by mjklin »

Excellent! Do you have to adjust the wheel assembly for the thickness of the book?
User avatar
jck57
Posts: 376
Joined: 23 Nov 2009, 15:21

Re: Monson's Servo Auto Scanner

Post by jck57 »

mjklin wrote:Excellent! Do you have to adjust the wheel assembly for the thickness of the book?
Thanks, mjklin. Don't have to adjust for thickness but do have to adjust for page size. The rubber wheel pusher works best when it hits the page close to the corner.
brosskgm
Posts: 16
Joined: 09 Jul 2012, 17:41
Number of books owned: 100
Country: USA
Location: Bakersfield

Re: Monson's Servo Auto Scanner

Post by brosskgm »

Do you have a latest instruction/parts file to share?

I found one for an earlier one but not # 8 or I must really be over looking it.

I really like the idea of the robotic one.

Thanks
Bob
User avatar
jck57
Posts: 376
Joined: 23 Nov 2009, 15:21

Re: Monson's Servo Auto Scanner

Post by jck57 »

brosskgm wrote:Do you have a latest instruction/parts file to share?

I found one for an earlier one but not # 8 or I must really be over looking it.

I really like the idea of the robotic one.
I keep revising stuff. Now working on a prototype constructed without plywood.
User avatar
jck57
Posts: 376
Joined: 23 Nov 2009, 15:21

Re: Monson's Servo Auto Scanner

Post by jck57 »

Starting on the new aluminum version.
IMG_1119.JPG
IMG_1119.JPG (123.21 KiB) Viewed 13847 times
IMG_1114.JPG
Post Reply